 |
DC Monitoring Products |
|
|
|
|
 |
| Hall Effect DC Current Sensors |
| DCS30 series |
| ±100-300 A, ±50 mV out |
| DCS35 series |
| ±100-600 A, 2.5 V ± 2.0 V |
| DCS36 Series |
| 0-300 A, 2.5 V ± 2.0 V |
| 0-600 A, 0-5.0 V |
|
|
|
|
- Electronic design eliminates need for mechanical shunts
- Sealed construction
- Weather resistant connector
|
- Emergency vehicles
- Trucks
- Buses
- Marine
- Instrument systems
|
|
InPower's DCS line consists of highly accurate electronic sensors for measuring dc current. They are Hall effect based sensors with an electronic interface circuit. There are models for use with conventional 50 or 100 millivolt ammeters, or electronic instrument systems. InPower current sensors are non-intrusive, in that they install over battery cables. They are small, do not generate heat, and have no exposed electrical potentials. They are affordable and are appropriate for numerous applications.
|
Available models:
| DCS30-100-1 |
±100 amps |
±50 millivolts |
| DCS30-150-1 |
±150 amps |
|
| DCS30-200-1 |
±200 amps |
|
| DCS30-300-1 |
±300 amps |
|
|
| DCS35-100-1 |
±100 amps |
2.5 volts ±2.0 volts |
| DCS35-200-1 |
±200 amps |
|
| DCS35-300-1 |
±300 amps |
|
| DCS35-400-1 |
±400 amps |
|
| DCS35-500-1 |
±500 amps |
|
| DCS35-600-1 |
±600 amps |
|
|
| DCS35-100-2 |
±100 amps |
2.5 volts ±2.5 volts |
| DCS35-200-2 |
±200 amps |
|
| DCS35-300-2 |
±300 amps |
|
| DCS35-400-2 |
±400 amps |
|
| DCS35-500-2 |
±500 amps |
|
| DCS35-600-2 |
±600 amps |
|
|
| DCS36-100-1 |
0 to 100 amps |
2.5 volts ±2.0 volts |
| DCS36-150-1 |
0 to 150 amps |
|
| DCS36-300-1 |
0 to 300 amps |
|
|
| DCS36-100-2 |
0 to 100 amps |
0 volts to 5.0 volts |
| DCS36-200-2 |
0 to 200 amps |
|
| DCS36-250-2 |
0 to 250 amps |
|
| DCS36-300-2 |
0 to 300 amps |
|
| DCS36-400-2 |
0 to 400 amps |
|
| DCS36-500-2 |
0 to 500 amps |
|
| DCS36-600-2 |
0 to 600 amps |
|
|
|
|
|
